Hummer 2005 H2 Manuel d'utilisateur télécharger pdf (Page 104)

100

101

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Locate the electrical cord near the front recovery

loop on the driver’s side of the vehicle.

3. Plug it into a normal, grounded 110-volt AC outlet.

{CAUTION:

Plugging the cord into an ungrounded outlet

could cause an electrical shock. Also, the

wrong kind of extension cord could overheat

and cause a ﬁre. You could be seriously

injured. Plug the cord into a properly grounded

three-prong 110-volt AC outlet. If the cord will

not reach, use a heavy-duty three-prong

extension cord rated for at least 15 amps.

4. Before starting the engine, be sure to unplug and

store the cord as it was before to keep it away

from moving engine parts. If you do not, it could be

damaged.

How long should you keep the coolant heater plugged

in? The answer depends on the outside temperature, the

kind of oil you have, and some other things. Instead

of trying to list everything here, we ask that you contact

your dealer in the area where you will be parking

your vehicle. The dealer can give you the best advice

for that particular area.

Automatic Transmission Operation

Your vehicle is equipped with an automatic transmission

and features an electronic shift position indicator

located within the instrument panel cluster.

There are several different positions for your shift lever.

PARK (P): This position locks your drive wheels. It

is the best position to use when you start your engine

because your vehicle cannot move easily.

2-28

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 467 468

Commentaires sur ces manuels

Pas de commentaire

Hummer 2005 H2 Manuel d'utilisateur Page 104

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Hummer 2005 H2