Hummer 2006 H3 Manuel d'utilisateur télécharger pdf (Page 321)

100

101

To replace one of these bulbs in the taillamp assembly,

do the following:

1. Open the swing-gate. See Swing-gate on page 2-9

for more information.

2. Remove the

two screws from

the taillamp

assembly.

3. Remove the taillamp assembly by pulling it gently

to release the two locator tabs. The locator tabs

connect the taillamp assembly to the vehicle’s frame.

4. Turn the bulb socket counterclockwise to remove

it from the taillamp housing.

5. Replace with a new bulb.

6. Insert the bulb into the taillamp housing and turn it

counterclockwise until it is locked into place.

7. Reinstall the rear lamp assembly by lining up the

locator tabs with the holes in the vehicle’s frame.

8. Reinstall the two screws.

Replacement Bulbs

Exterior Lamp Bulb Number

Back-up Lamp, Stoplamp,

Taillamp and Turn Signal Lamp

3157K

Low-Beam and High-Beam

Headlamp

H13

For replacement bulbs not listed here, contact your

dealer.

Passenger’s Side

Shown

5-49

1 2 ... 316 317 318 319 320 321 322 323 324 325 326 ... 419 420

Commentaires sur ces manuels

Pas de commentaire

Hummer 2006 H3 Manuel d'utilisateur Page 321

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Hummer 2006 H3